Description: The NUC (Next Unit of Computing) is an ultra-compact 4 X 4 powerful full featured machine that weighs less than 18 ounces. These systems come barebones. To be fully functional you will need to add an SSD drive, RAM and a wireless card. These are also small enough to be mounted on the back of a monitor using standard VESA mounts. Mounting bracket is included. This article will show you how to add RAM to this unit.The first step is to open the NUC by using a Philips head screwdriver. The next step is to locate the RAM slots. To install the RAM line up the RAM with the slot. It will only go in one way - line up the spacer and push in a forward motion. Press the memory down and into place, it should snap into place.